Hyperco 2018+ Polaris XPT4 Performance Spring Kit
Estimated delivery: -
Hyperco’s line of UTV Performance Spring Kits will boost your 2017+ Polaris XPT4 to the next level. Designed to improve the overall ride quality and performance, this kit feature the race winning and trail dominating spring technology that Hyperco is known for. Each kit comes with the Hypercoil springs and hardware components (crossover nuts and sliders) needed for a complete suspension spring upgrade. Hyperco products are engineered, manufactured, and tested in the USA.
Hyperco UTV Spring upgrdes fit over the factory coilover shocks and are designed to keep the vehicle flat and in control by reducing the buck and excessive dive often found with factory setups. If you’ve ever driven your UTV fast over choppy terrain, floored it on sand highway, or railed it out on the dunes, you’ve probably found the limits to your factory suspension. It’s no fun driving a bucking UTV that fights you any time you want to go full throttle.
SETUP AND INSTALL
Coil springs are relatively simple to install. Hyperco has already done the hard work for you on setup. Included are step-by-step instructions with every kit. If you’re good with tools, you can perform do job in your very own garage. There’s no need for additional shock tuning, revalving or modifications to run the Hyperco UTC Spring Upgrade. You will really like Hyperco’s approach to adding suspension performance. They keep it simple and economical for the UTV owner. Your wallet will especially like the fact that the factory coilover shocks are used with this spring kit, saving you owners thousands of dollars. There’s no need to throw out your factory shocks; simply replace the springs and enjoy the new ride.
Benefits of Hyperco UTV Performance Spring Kits
- More deflection = a smoother, more consistent ride with the ability to handle more weight
- Less weight = an increased efficiency in movement and response time
- Increased rate linearity = a controlled, more predictable, thus safer ride
- More resistance to bowing = less friction and wear for an enhanced shock life
- Maintained free length and installed height (the springs won’t sag over time) = a consistent vehicle height and ground clearance
SHOCK TUNING
Your OEM coilover shocks already come tuned from the factory, but if you’re dying to play with the adjustments to fine-tune the ride even further, just be sure to take notes on where you started in case you want to return to programmed factory settings. The rebound and compression can be adjusted by either turning a screw or knob(s) found on the shock. Check your owner’s manual for more information on shock adjustment.
About Hyperco
Hyperco, an MW Industries company, engineers and manufactures precision, high-performance suspension coil springs, kits and related components supporting original equipment manufacturers and aftermarket customers in motorsports, streetperformance, off-road, powersports and automotive markets. Hyperco’s catalog and custom products are designed to improve the total performance, aesthetics and durability of vehicles.
WARRANTY
HYPERCO LIMITED ONE YEAR AND LIMITED LIFETIME WARRANTY: MW Industries, Inc., through its division Hyperco, ("Hyperco") warrants to the original retail purchaser (“Purchaser”) that for the warranty period set forth below that all products it sells (“Products”) will be free from defects in materials and workmanship and in conformity with Hyperco's specifications. In addition, Hyperco warrants to the Purchaser that for the life of any Product which is classified solely by Hyperco to be a coil spring for use in a vehicle suspension, the spring shall be within 2% above and 2% below the nominal specification for rate and free length. The limited warranty period for all Products is defined as one (1) year from date of shipment. Any obligation under the limited warranty is limited to the repair or replacement of the Product only. This limited warranty constitutes the fulfillment of Hyperco’s responsibility, and Hyperco is not liable for any expenses, special or consequential damages or any other obligation or liability whatsoever above and beyond the repair or replacement of the Products. Hyperco's liability is limited to the repair or replacement of the product deemed by Hyperco to be defective. Excluded from this limited warranty are any Products which have been subjected to misuse, neglect, accident, improper application or installation, or any material or Product which has been altered or repaired outside our factory. The Product must be returned by Purchaser to the original place of purchase within 2 weeks past the end of the warranty period in order for the limited warranty to apply. NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE PRODUCTS AND ALL OTHER WARRANTIES ARE EXPRESSLY DISCLAIMED INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
FITS
- 2018 Polaris XPT4 Springs
- 2019 Polaris XPT4 Springs
- 2020 Polaris XPT4 Springs
SKU: 1201PO-XP4-1
